Helen's Top Tips for Aspiring Metalworkers: A Jewelry Expert's Metalsmithing Dos and Don'ts

23 Dec 2011

I meet people on a regular basis who want to learn metalsmithing and other jewelry fabrication techniques, and I'm fortunate to always have a wealth of resources to share with them. One such resource is Helen Driggs, senior editor of Lapidary Journal Jewelry Artist magazine and host of best-selling jewelry-making Metalsmith Essentials series DVDs, including Basic Fabrication, Textures and Patinas, and Riveting and Cold Connections.

 
In addition to those, Helen is also a metalsmithing teacher. Former Beading Daily editor Kristal Wick interviewed Helen awhile back to find out Helen's advice for aspiring metalworkers. Kristal confessed that metals are excciting and alluring to her--me too!--but also intimidating. Many folks are intimidated by taking that leap, but Helen shared great information and metalsmithing tips that I wanted to share with you, too--especially for all of you who have vowed to go beyond stringing or wirework to metalsmithing in the New Year! You can do it! Here's how.

Kristal: What's your best advice for anyone who wants to begin working in metal?

Helen: The most important thing I did was take a 10-week Jewelry and Metals class at the The University of The Arts in Philadelphia. It gave me a firm foundation in all of the basics, plus I learned to solder, use the shop tools properly, and I had access to open-studio time to continue working after hours. That time was invaluable, because I was able to see what the metals majors were working on, ask lots of questions, and I was exposed to many techniques and metalworking disciplines that weren't covered in my basics class, such as blacksmithing, enameling, forging, and casting. Seeing that work going on helped me to decide what I wanted to pursue in my own work. Plus, art school is just a kick!

Kristal: Do you have any Dos and Don'ts for the aspiring metalworker?

Helen: DON'T buy every tool just because it is there. Buy what you need, as you need it, or as you learn how to use it. Buy it if you are certain you need that tool at least once a week. It's really better to have lots of metal than lots of tools! Although I seem to have lots and lots of tools...

DO take every class or workshop you possibly can, according to your interests. Being a good metalworker is based on skill building: each thing you learn builds on what you have already learned. Even if you don't want to go in the specific direction the class is focused on, be open to learning what that teacher can show you. Pay attention and commit to making the object you are learning to make to the best of your ability. Do it the way the teacher shows you. Take a lot of notes and ask the teacher for more information. Then, you can freelance later at home.

DON'T work too far above your skill level, because you will only become frustrated. Sure, everybody wants to make complex, well-designed, interesting, and beautiful pieces with gold and precious metal. But first you need to be a competent fabricator, be able to solder well, use your tools like an expert, know how to set stones, and work in several metals to do that. The best thing to do is practice a technique without a thought of making a piece of jewelry. Work in copper or brass. Get good at sawing, forming, and soldering. When you perform a specific task over and over, you'll eventually have what it takes to make nice jewelry. Make twenty bezels just for the sake of learning. It's worth it. "Go slow and get them all" is my motto.

DO read everything you can to learn about techniques. There are literally millions of ways you can go with metal. It's your job as an artist to find your way. Once you find a technique you like, try making 5 or 10 pieces using that technique to build a body of work with a logical progression. Eventually, you'll figure out where to go next.

DON'T give up. If a piece stonewalls you, set it aside for awhile and start something else. Eventually, through good work and practice, an idea to solve the problem on the set- aside piece will spring up. All artists have blocks—it is a natural part of the cycle of creativity. I always have four or five works running at once. Breaking away to do something different is often just what I need to help me go back to address a problem in another work.

DO try something spontaneous once in awhile. Creativity is really just play. Just take out a hammer and a sheet of copper and see what happens. Or, find a project in Lapidary Journal Jewelry Artist and give it a whirl. If you don't have the exact materials, do the best you can with what you have. Remember—you are learning, so no effort is wasted. --Helen

 
Learn More About Metalsmithing with Helen
So if you're ready to embark on a metalsmithing adventure and learn more, get Helen's first DVD, Metalsmith Essentials: Basic Fabrication (or download it instantly). Through nine lessons, Helen walks you through the steps to get started with metal jewelry fabrication, including sawing, filing, hammering, forging, texturing, and more. You'll learn about metalsmithing safety, metal jewelry-making tools, and the fundamentals behind making jewelry out of silver as well as alternative metals brass and copper. She also shares how to punch and drill holes in metal, cold connections, metal stamping, money- and metal-saving tips, fold-forming techniques, and how to properly finish your designs. It's a truly comprehensive metalsmithing introduction!

Even More Metalsmithing
Still want more? We've gathered all of our best metalsmithing information and resources in one convenient spot. Think of it as your go-to resource for metalsmithing and bookmark the Metalsmithing page!


Featured Products

Metalsmith Essentials Basic Fabrication with Helen Driggs DVD

Availability: In Stock
Price: $39.99

DVD

Take your skills and jewelry designs to the next level with the versatility of metal jewelry making.

More

Metalsmith Essentials: Basic Fabrication with Helen Driggs (Video Download)

Availability: In Stock
Price: $19.95

Standard Definition Video

Instantly take your skills and jewelry designs to the next level with the versatility of metal jewelry making.

More

Related Posts
+ Add a comment

Comments

on 18 Jan 2012 1:42 PM

great advice  !